Imodyuli yomfanekiso we-infrared ye-infrared yomfanekiso we-M384
Imodyuli yokucinga eshushu isekwe kwi-ceramic yokupakisha engapholiswanga i-vanadium oxide infrared detector ukuphuhlisa ukusebenza okuphezulu kwemveliso ye-infrared thermal imaging, iimveliso zamkela ujongano oludityanisiweyo lwemveliso yedijithali, ujongano lutyebile, ukufikelela okuguquguqukayo kweqonga lokusetyenzwa ngobukrelekrele, kunye nokusebenza okuphezulu kunye namandla aphantsi. ukusetyenziswa, umthamo omncinci, kulula kwiimpawu zokudityaniswa kophuhliso, unokuhlangabezana nokusetyenziswa kweentlobo ezahlukeneyo zobushushu bokulinganisa i-infrared yemfuno yophuhliso lwesibini.
Okwangoku, ishishini lamandla lelona shishini lisetyenziswa kakhulu kwisixhobo sokujonga i-infrared thermal imaging. Njengeyona ndlela isebenzayo kunye nekhulileyo yokuchongwa kokungadibanisi kuthetha, i-infrared thermal imager inokuphucula kakhulu inkqubela yokufumana ubushushu okanye ubungakanani bomzimba, kwaye iphucule ngakumbi ukuthembeka kokusebenza kwezixhobo zobonelelo lwamandla. Isixhobo se-infrared thermal imaging sidlala indima ebaluleke kakhulu ekuphononongeni inkqubo yobukrelekrele kunye ne-automation ephezulu kushishino lwamandla.
Uninzi lweendlela zokuhlola iziphene zomphezulu wamalungu emoto yindlela yovavanyo engonakalisiyo yokugquma imichiza. Ngoko ke, iikhemikhali ezigqunyiweyo kufuneka zisuswe emva kokuhlolwa. Ngoko ke, ngokombono wokuphuculwa kwendawo yokusebenza kunye nempilo yabasebenzi, kufuneka kusetyenziswe iindlela zokuvavanya ezingonakalisi ngaphandle kweekhemikhali.
Oku kulandelayo kukwazisa ngokufutshane kwezinye iindlela zokuvavanya iikhemikhali ezingenakonakala. Ezi ndlela kukusebenzisa ukukhanya, ubushushu, i-ultrasonic, i-eddy yangoku, yangoku kunye nolunye uchulumanco lwangaphandle kwinto yokuhlola ukutshintsha ubushushu bento, kwaye usebenzise i-infrared thermal imager ukwenza uhlolo olungonakalisi kwiziphene zangaphakathi, iintanda, ukucwecwa kwangaphakathi kwento, kunye nokuwelda, ukubopha, iziphene ze-mosaic, ukuxinana kwe-inhomogeneity kunye nokutyeba kwefilimu.
Itekhnoloji yovavanyo lwe-infrared thermal engonakalisiyo ineengenelo zokukhawuleza, ezingonakalisi, ezingaqhagamshelwanga, ixesha lokwenyani, indawo enkulu, ukubonwa okude kunye nokubonwa. Kulula kubasebenzi ukuba baqonde indlela yokusetyenziswa ngokukhawuleza. Isetyenziswe ngokubanzi kwimveliso yomatshini, isinyithi, i-aerospace, unyango, i-petrochemical, amandla ombane kunye nezinye iinkalo. Ngophuhliso lwetekhnoloji yekhompyuter, inkqubo yokubeka iliso ekrelekrele kunye nokufumanisa i-infrared thermal imager kudityaniswe nekhompyuter ibe yinkqubo yokufumanisa eqhelekileyo kwiindawo ezininzi nangakumbi.
Uvavanyo olungonakalisiyo sisifundo setekhnoloji esisetyenziswayo esisekwe kwisayensi kunye nobuchwephesha bale mihla. Isekelwe kwisiseko sokungabhubhisi iimpawu zomzimba kunye nesakhiwo sento eza kuvavanywa. Isebenzisa iindlela ezibonakalayo zokubona ukuba ngaba kukho ukungaqhubeki (iziphene) ngaphakathi okanye kumphezulu wento, ukuze ugwebe ukuba into eza kuvavanywa ifanelekile, kwaye emva koko ivavanye ukwenzeka kwayo. Okwangoku, umfanekiso we-infrared thermal usekwe kwi-non-contact, ngokukhawuleza, kwaye unokulinganisa ubushushu beethagethi ezihambayo kunye neethagethi ezincinci. Ingabonisa ngokuthe ngqo intsimi yobushushu obuphezulu bezinto ezinesisombululo esiphezulu sobushushu (ukuya kuthi ga kwi-0.01 ℃). Ingasebenzisa iindlela ezahlukeneyo zokubonisa, ukugcinwa kwedatha kunye nokusebenza okukrelekrele kwekhompyuter. Isetyenziswa ikakhulu kwi-aerospace, i-metallurgy, oomatshini, i-petrochemical, oomatshini, i-architecture, ukukhuselwa kwehlathi lendalo kunye neminye imimandla Domain.
Iiparamitha zemveliso
| Uhlobo | M384 |
| Isigqibo | 384×288 |
| Indawo yePixel | 17μm |
|
| 93.0°×69.6°/4mm |
|
|
|
|
| 55.7°×41.6°/6.8mm |
| FOV/Ubude bojoliso |
|
|
| 28.4°x21.4°/13mm |
* Ujongano oluhambelanayo kwimowudi yokuphuma ye-25Hz;
| I-FPS | 25Hz | |
| NETD | ≤60mK@f#1.0 | |
| Ubushushu bokusebenza | -15℃～+60℃ | |
| DC | 3.8V-5.5V DC | |
| Amandla | <300mW* | |
| Ubunzima | <30g (13mm ilensi) | |
| Ubungakanani(mm) | 26*26*26.4(13mm ilensi) | |
| Ujongano lwedatha | iyahambelana/USB | |
| Ujongano lolawulo | SPI/I2C/USB | |
| Ukuqina komfanekiso | Ukwandiswa kweenkcukacha zeegiya ezininzi | |
| Ulungelelwaniso lomfanekiso | Ukulungiswa kwesivalo | |
| Iphalethi | Ukubengezela okumhlophe/kushushu okumnyama/iipleyiti ezinombala ongazenzisiyo ezininzi | |
| Uluhlu lokulinganisa | -20℃~+120℃(ilungiselelwe ukuya kuthi ga kwi-550℃) | |
| Ukuchaneka | ±3℃ okanye ±3% | |
| Ukulungiswa kobushushu | Imanyuwali / iyazenzekela | |
| Imveliso yezibalo zobushushu | Imveliso ehambelanayo yexesha langempela | |
| Amanani omlinganiselo wobushushu | Xhasa amanani aphezulu / ubuncinane, uhlalutyo lobushushu | |
inkcazo yojongano lomsebenzisi
Umfanekiso1 wojongano lomsebenzisi
Imveliso ithatha i-0.3Pitch 33Pin isixhumi se-FPC (X03A10H33G), kunye ne-voltage yegalelo: 3.8-5.5VDC, ukukhuselwa kwe-undervoltage akuxhaswanga.
Ifom yoku-1 yojongano lwephini lomfanekiso oshushu
| Inombolo yePin | igama | uhlobo | I-Voltage | Inkcazo | |
| 1,2 | VCC | Amandla | -- | Ukunikezwa Amandla | |
| 3,4,12 | GND | Amandla | -- | 地 | |
| 5 | USB_DM | I/O | -- | I-USB 2.0 | DM |
| 6 | USB_DP | I/O | -- | DP | |
| 7 | USBEN* | I | -- | I-USB yenziwe yasebenza | |
| 8 | SPI_SCK | I |
Ukungagqibeki: 1.8V LVCMOS ; (ukuba kufuneka 3.3V Imveliso yeLVCOMS, nceda uqhagamshelane nathi) |
SPI | SCK |
| 9 | SPI_SDO | O | SDO | ||
| 10 | SPI_SDI | I | I-SDI | ||
| 11 | SPI_SS | I | SS | ||
| 13 | DV_CLK | O |
VIDEOl | CLK | |
| 14 | DV_VS | O | VS | ||
| 15 | DV_HS | O | HS | ||
| 16 | DV_D0 | O | IDATHA0 | ||
| 17 | DV_D1 | O | IDATHA1 | ||
| 18 | DV_D2 | O | IDATHA2 | ||
| 19 | DV_D3 | O | IDATHA3 | ||
| 20 | DV_D4 | O | IDATHA4 | ||
| 21 | DV_D5 | O | IDATHA5 | ||
| 22 | DV_D6 | O | IDATHA6 | ||
| 23 | DV_D7 | O | IDATHA7 | ||
| 24 | DV_D8 | O | IDATHA8 | ||
| 25 | DV_D9 | O | IDATHA9 | ||
| 26 | DV_D10 | O | DATA10 | ||
| 27 | DV_D11 | O | IDATHA11 | ||
| 28 | DV_D12 | O | IDATHA12 | ||
| 29 | DV_D13 | O | IDATA13 | ||
| 30 | DV_D14 | O | IDATHA14 | ||
| 31 | DV_D15 | O | IDATA15 | ||
| 32 | I2C_SCL | I | I-SCL | ||
| 33 | I2C_SDA | I/O | SDA | ||
unxibelelwano yamkela iprotocol yonxibelelwano ye-UVC, ifomathi yomfanekiso yiYUV422, ukuba ufuna ikiti yophuhliso lonxibelelwano lwe-USB, nceda uqhagamshelane nathi;
kuyilo lwe-PCB, isignali yevidiyo yedijithali ehambelanayo iphakamise i-50 Ω ulawulo lokuphazamiseka.
Form 2 Iinkcukacha zombane
Ifomathi ye-VIN =4V, TA = 25°C
| Ipharamitha | Chonga | Imeko yovavanyo | MIN TYP MAX | Iyunithi |
| Uluhlu lwamandla okufakwayo | VIN | -- | 3.8 4 5.5 | V |
| Umthamo | ILOAD | USBEN=GND | 75 300 | mA |
| I-USBEN=PHEZULU | 110 340 | mA | ||
| Ulawulo lwe-USB olusebenzayo | I-USBEN-PHANTSI | -- | 0.4 | V |
| I-USBENDE- HIGN | -- | 1.4 5.5V | V |
Form 3 Absolute Maximum rating
| Ipharamitha | Uluhlu |
| VIN ukuya kwi-GND | -0.3V ukuya +6V |
| DP, DM ukuya GND | -0.3V ukuya +6V |
| I-USBEN ukuya kwi-GND | -0.3V ukuya kwi-10V |
| SPI ukuya kwi-GND | -0.3V ukuya +3.3V |
| VIDEO ukuya kwi-GND | -0.3V ukuya +3.3V |
| I2C ukuya kwi-GND | -0.3V ukuya +3.3V |
| Iqondo lokugcina | −55°C ukuya +120°C |
| Ubushushu bokusebenza | −40°C ukuya +85°C |
Qaphela: Uluhlu oludwelisiweyo oludibana okanye olugqithise umlinganiselo opheleleyo lunokubangela umonakalo osisigxina kwimveliso.Olu luqondo loxinzelelo;Akuthethi ukuba ukusebenza kweMveliso phantsi kwezi okanye nayiphi na enye imeko kuphezulu kunezo zichazwe kwi icandelo lemisebenzi yalo mba. Ukusebenza ixesha elide okudlula iimeko zokusebenza eziphezulu kunokuchaphazela ukuthembeka kwemveliso.
Idayagram yolandelelwano lwemveliso yedijithali (T5)
Umzobo: 8bit umfanekiso onxuseneyo
M384
M640
M384
M640
Umzobo: 16bit Umfanekiso ohambelanayo kunye nedatha yobushushu
M384
M640
Ingqalelo
(1) Kucetyiswa ukuba kusetyenziswe iClock edge sampling yedatha;
(2) Ungqamaniso lwentsimi kunye nongqamaniso lomgca zombini zisebenza kakhulu;
(3) Ifomathi yedatha yomfanekiso yi-YUV422, i-data ephantsi ye-Y, kwaye i-bit ephezulu yi-U / V;
(4) Iyunithi yedatha yeqondo lokushisa ngu (Kelvin (K) * 10), kwaye ubushushu bokwenene bufundwa ixabiso / 10-273.15 (℃).
Isilumkiso
Ukukhusela wena nabanye ekwenzakaleni okanye ukukhusela isixhobo sakho ekonakalisweni, nceda ufunde zonke ezi nkcukacha zilandelayo ngaphambi kokuba usebenzise isixhobo sakho.
1. Musa ukujonga ngokuthe ngqo kwimithombo yemitha ephezulu efana nelanga kumacandelo okunyakaza;
2. Ungachukumisi okanye usebenzise ezinye izinto xa ungqubana nefestile yesixhobo sokubona;
3. Musa ukubamba izixhobo kunye neentambo ngezandla ezimanzi;
4. Musa ukugoba okanye ukulimaza iintambo zokudibanisa;
5. Musa ukukhuhla isixhobo sakho ngezinto zokuthambisa;
6. Musa ukukhupha okanye ukuplaga ezinye iintambo ngaphandle kokuqhawula umbane;
7. Musa ukudibanisa intambo eqhotyoshelweyo ngokungalunganga ukuphepha ukonakalisa izixhobo;
8. Nceda uqaphele ukuthintela umbane ongatshintshiyo;
9. Nceda ungazahluli izixhobo. Ukuba kukho nayiphi na impazamo, nceda uqhagamshelane nenkampani yethu ukuze ufumane ukugcinwa kobugcisa.
umbono wesithombe
Umzobo wedimension ye-Mechnical interface
-
Umgangatho ophezulu wekhamera ye-Infrared Thermal Imaging Camera...
-
Ivenkile yeOEM/ODM Factory Price 256X192 Resolut...
-
Umthengisi we-OEM/ODM kunye nomvelisi we-Infrared T...
-
umzi-mveliso ngexabiso eliphantsi Handheld Thermal imaging ca...
-
Uluhlu lwamaxabiso kuMlinganiso woBubushushu beDianyang ...
-
Imodyuli ye-M256 engapholiswanga yomfanekiso we-thermal